Maria
7th November 2003, 15:25
Most of you will probably remember me posting a topic a while back asking who would be interested in a set of panels at a discount from Rover. After allowing sufficient time for those not lucky enough to be internet-enabled to respond to the advert in the club mag, I can confirm that we definitely have enough interest to go ahead.
While I still don't have a rough figure on how much a panel set would be, I can tell you that the offer can be extended to other panels than the original doors/bonnet/tailgate set.
The proposal is that we make a bulk order for as many panels as people want. The offer still hinges on panel sets, but I have been advised by my contact who is sorting this out with his local Rover dealer that other panels will work out considerably cheaper through this offer. As an example, the panel which forms the "pocket" that the fuel filler neck fits through would normally retail for around £15. As part of a bulk order, we could get it for as low as a couple of quid.
The offer includes any panels as these are usually not model-specific (the exception being tailgates and front valance for some models like the turbos), lights units and also headlinings.
I need a revised list of who would be interested ASAP. This will not yet be a full committment, but obviously if you can put your name and order down as definite, this will make negotiations much easier.
I believe this is an offer that is well worth taking up, so PM/email/ring/write to me with your requirements as soon as possible!
While I still don't have a rough figure on how much a panel set would be, I can tell you that the offer can be extended to other panels than the original doors/bonnet/tailgate set.
The proposal is that we make a bulk order for as many panels as people want. The offer still hinges on panel sets, but I have been advised by my contact who is sorting this out with his local Rover dealer that other panels will work out considerably cheaper through this offer. As an example, the panel which forms the "pocket" that the fuel filler neck fits through would normally retail for around £15. As part of a bulk order, we could get it for as low as a couple of quid.
The offer includes any panels as these are usually not model-specific (the exception being tailgates and front valance for some models like the turbos), lights units and also headlinings.
I need a revised list of who would be interested ASAP. This will not yet be a full committment, but obviously if you can put your name and order down as definite, this will make negotiations much easier.
I believe this is an offer that is well worth taking up, so PM/email/ring/write to me with your requirements as soon as possible!