PDA

View Full Version : Monty parts clearence (most are new).


talkingcars
9th June 2006, 21:44
4 x 14" Steel wheels covers from a '92 SLXi Estate

Used and in need of repainting but not badly kerbed

£10 for the set.
.................................................. ......................
Ignition set for 2.0i (also suit maestro)
Coil - motaquip
Cap & Leads - halfords
Plugs - Champion RN7YC
No rotor arm
These were used for about 5 minutes to establish fault on car which turned out to be a terminal head gasket.
Thermostat VTK 2 - Motaquip

£25
.................................................. .........................
Lucas ECUs

Ignition
ADU 9335E
(Brand new/unused - still in original tamper proof bag and box)
£50

ADU 9336 and NNN10005
(both beleived to be working when removed but not quaranteed)
£5 each

Fuel injection
ADU9215 and AUU1313
(both beleived to be working when removed but not quaranteed)
£5 each
.................................................. ...................................
Repair panel
AME 32014
belived to be part of rear on estate but not sure where
£20
.................................................. ...................................
Trim
Door mouldings
1 x JPC 1465 (long)
1 x JPC 1471 (short)
Both brand new, original packing, black with black insert.
£6 each, £10 for the pair
..............
Late door pocket N/S - KPC 1759 LCG
£6
Estate rear hatch bottom lip trim JPC 5498
£6
.................................................. .................

Unless otherwise mentioned these are all genuine Rover parts, brand new, unused and in original packing.

All the above are advertised else where and may go on eBay if not sold after MGSD 06.

Please pmail me if you are interested.

James