Plastic plugs for carb / ECU

[John S]

Hi,

Can anyone tell me where I can get the plastic plugs for the above. They are an 'L' shape and tend to split if applied too much pressure..

thanks,

John

[Jumturbo]

Must admit, same happened with mine. I ditched the whole pipe and got some silicone tubing of the right internal dia. Think it was 3mm......needs to be a tight fit. Best measure it first. Loads of tubing on ebay etc.

[E_T_V]

Good motorfactors often have them, either with tubes attached or just the elbows.

[G51 NAV]

There's obviously a few of us looking for these lol. I think they must get brittle over time with temperature changes.